Advantages of Using UV Liners for Pipe Repair
There are certain things to be considered once you have to have your sewer pipes rehabilitated. You must know the materials used and its procedure. One of the famous and effective materials used in pipe rehabilitation is the installation of the UV liner. This material is indeed an effective, durable and contains numerous advantages once used in pipes. Discussed below are some of the advantages of using UV liners for pipe rehabilitation.
Setting up or installing a UV liner and a basic resin liner has the same principle. However, there are some differences between the two in terms of the process and installation. It is much easier to install a UV liner compared to the basic resin liner. With the help of the hydro jetter, blockages in pipes are completely eliminated. There are two entry points where the UV liner is pulled and this step is possible and done easily with the aid of a glide foil. When the UV liner is already in place, it is blocked by the use of caps while the air pressure is added and leaves the liner while it is cured by the UV lighting. The curing process does not require the usage of steam or hot water, unlike other methods. One main advantage of placing a UV liner while the process is ongoing is that it is done quickly without even eliminating or reducing the quality of the liner.
Relining contractors use fibreglass to toughen it just like metal pipes and some resins. On the other side, the capacity of the hydraulic is also increased which allows the process to consume less resin. In this situation, you already have a tough liner which is done in a faster process.
Improves Flow Capacity of Wastewater
One of the many things to be considered in installing a liner into the sewer system is the effect of the material composition of the liner. The usage of epoxy resin is popular as it improves the flow capacity of the wastewater. This is why most plumbing contractor prefers to use this material than other resin. However, UV liner contains polymeric films which improve the hardness and improves the flow capacity of the wastewater.
Cheaper Overall cost
In having your pipes repaired, this is probably one of the things that worry you much. Rehabilitating pipes could be costly so you must be wise enough in dealing with these types of plumbing problems. Choose pipe rehabilitation methods that could be done within a day to save on the total time of labour. You can save money on the expense of the long process of the rehabilitation which includes the setting up, cleaning, inspecting, lining and examining the liner once you consider rehabilitation methods that can be done within a day. If you’re wise enough, you would go for a pipe repair that would cost you less which is the pull-in-place pipe lining. This is indeed a practical choice as you can have your pipes cured in a cheaper and faster process.