8 Pipe Bursting Myths Exposed

plumberchippendale pipe bursting

Modern plumbing technology comes in different trenchless methods that cause minimal landscape damage and surface traffic disruption. Pipe bursting is one of them. It is a reliable and time-efficient way to replace damaged pipes that involves slight digging. Some people believe the myths that surround pipe bursting. It is important to clarify such misconceptions so that these persons will not refrain from an efficient plumbing remedy just because they believed the wrong things. Read about these myths below.

  1. Trenchless is NOT essentially trench-free

Innovative modern pipe repairs have popularized their no-dig rehabilitation. Some people think that avoid availing pipe bursting since excavation is necessary in it. However, it should be clear to these persons that it is ‘trenchless’ and not ‘trench-free’. Pipe bursting is not half-baked in reducing landscape damage since it involves 80-90% less trenches compared to its traditional counterpart.

What’s more, other trenchless methods such as slip lining and inversion may be incapable of fixing the entire sewer system if it is severely damaged. The best option you can rely on to restore your sewer system back to its optimum structural integrity is to replace the pipes.

  1. It is very expensive.

Formerly, pipe bursting could an upscale pipe repair method since it was not that popular and the available equipment for it are not easily available. Consequently, people immediately assume that pipe bursting nowadays is as expensive as before. Moreover, their misconception that pipe bursting only applies to inaccessible pipes for digging discouraged them from availing the service. Pipe bursting at present has become affordable and sought-after so people should not deter from it.

  1. Pipe bursting is compared alongside other trenchless methods.

Pipe bursting is definitely different from other trenchless methods such as PIPP, and CIPP since the latter are trenchless rehabilitation methods. Meanwhile, pipe bursting is a trenchless replacement technology.

  1. Pipe bursting is only applicable to pipes that cannot be dug up.

It is a mistaken impression that pipe bursting is only administered if the pipes are not accessible for digging. This method is actually adaptable to assorted plumbing conditions such as the pipes that are located in areas with heavy surface traffic (e.g. roads, parks). Traditional methods are too pervasive to be applied in public areas. Not to mention it can cause hefty repair costs and far-reaching restorative work.

  1. Pipe bursting is only useful for enlarging the diameter of the sewer line.

Although pipe bursting intrinsically expand the diameter of the sewer line due to the force from bursting the pipes, it is not only meant for that purpose. Pipe bursting may also utilize a pipe that contains the identical proportions of the existing pipes.

  1. It only uses HDPE.

Pipe bursting is not only confined to using HDPE. Although HDPE is obligatory in pneumatic method, static pipe bursting, it is open to other types of pipes like the restrained joint PVC, thermally fused PVC, etc. Hence, the general pipe bursting method is not just limited to HDPE.

  1. Pipe bursting is only economical if there are only a few number of service connections.

It is true that the expenses and range of excavation are affected by the number of service connections on a pipe bursting project for sewer lines or water or gas replacement. Nonetheless, the overall downsize of excavation during pipe bursting is 80 perpent, regardless of the significant number of service digging. Moreover, the project cost is substantially meagre than that of open-cut methods.

  1. Potable water mains are exempted from pipe bursting.

Pipe bursting is applicable to potable water mains. As a matter of fact, it is convenient to burst the pipes from these systems since these are usually made up of plastic or cast iron. When installing a new pipe with enhanced capacity, there are several pipe splitting techniques available.

The plumbing technology is not immune to circulating myths and misconceptions that people tend to believe due to misinformation or lack of education. Make sure that you have non-biased information so that you are not deterred from an effective solution that could have helped you solve your plumbing issue.