7 Causes of a Leaky Faucet

fixing_leaky_faucet_sYour home would never be the same without a faucet around. Imagine what it would be like without an appliance where water can flow anytime you need it to – no need to go out and fetch water like Jack and Jill. But of course, like any device there are times that leaky faucets disturb the peace in your home. More than the inconvenience, you can also expect the catastrophic increase in your water bill.

Typically, faucet dripping is due to mineral deposit on the internal part of the faucet, corrosion and others. It is somehow basic for anyone in the house to have simple tools that can be used to fix simple leaks but be wary about this as it can also lead to bigger problems eventually.

What causes leaky faucet?

  1. Corrosion in the valve seat.

The valve seat is the connection of the faucet and the compression mechanism of the spout. When water sediments accumulate, the valve seat would corrode and causing leakage around the spout area. In order to avoid this, you must see to it that the valve is regularly cleaned by engaging your trusted professional plumber.

  1. O ring problems.

The O ring is the small disc attached to the stem screw that holds the faucet in place. This is a very important part of the instrument where most leaks can occur. Due to wear and tear over regular usage, the faucet may have leaks near the handle but this is easy to resolve as it only involves replacing the O ring.

  1. The washer was not properly installed.

When the washer is not properly installed or is not the correct size, an eventual leak can occur. Properly installing the washer may need the help of professionals but once it is properly done, you can say goodbye to any leakage problem.

  1. Worn out washer.

Many of leaky faucet incidents is due to the worn out washer used. When you open the faucet, the washer is forced against the valve seat resulting in friction. Over time, the constant friction and resistance leads to the wear and tear of the material of the washer thus leading to leaks. The spout is the part where leaks are noticed. The simple solution to resolve this is to replace the worn out rubber washers with new ones.

  1. Seal has worn out.

This is another common problem that leads to leaks. The inlet and outlet seals are part of disc faucets. When used constantly, there are sediments that can accumulate in the assembly thus the seals become worn out over time and become the reason for leaky faucets. In order to resolve this, hire a plumbing professional you trust and have the sediments cleaned regularly from the inlet to the outlet seals. Once the seals are replaced, the faucet then works properly again.

  1. Some parts of the faucet are loose.

Constant usage leads to wear and tear and some nuts and rings also become loose that leads to leaks. Resolving this simply involves tightening the nuts and rings again.

  1. Broken plumbing.

This may be rare but the leaks can also be due to broken pipes or fittings. When there are cracks and other problems in the system, water pressure becomes inconsistent causing you to adjust the opening of the faucet. If left unfixed or when there is a sudden high pressure, the faucet may be affected. It is best to check with professionals to resolve this problem.

Do you have leaky faucets around the house? Call on your trusted plumbing professionals to have the problem resolved.