4 Easy Ways to Fix Leaky Pipes

plumber chippendale 4 Easy Ways to Fix Leaky PipesOne recurrent and messy problem when it comes to pipe damage issues is how easy a pipe can acquire leaks. Once you notice this issue with your pipes, you are obliged to spare a rather expensive budget to get it fixed; otherwise, it can cause your entire system’s collapse. Leaky pipes can cause floods inside your home. To avoid this dilemma, your very first line of defence is to not let minor damages unfixed for long. The immediate solution is best to keep your plumbing system on top of its game. Here are 4 easy ways to help you fix your problem:

1. Rub a compound stick.

One way of fixing a damaged pipe is through the use of a compound stick. You simply have to rub the stick over the leaked or cracked area to amend the gap.
First, shut the supply system by activating the shutting valve. This step is optional for really tiny leaks. However, for bigger gaps in the pipe, you really have to shut the supply in order for you to properly apply the compound stick. You will be able to purchase a compound stick at your local plumbing or hardware store.

2. Tighten the joints.

Leaks normally start from tiny cracks made by loose joints. There are times that even corrosion originates in these areas. Make sure that during the installation process all joints and fittings are screwed on tightly to prevent them from getting loose once they are already buried into the soil. Also, apply Teflon tape between each pipe fitting to act as a tightening material and to block the small gaps there may be. Tighten the joining area using a wrench.

3. Use epoxy sticks.

When you locate the source of the leak and you find it to be a weak fitting, you will need an epoxy paste to remedy the problem. Remember that it is standard procedure during a pipe fixing process to always turn off the supply valve and proceed to wipe off the excess moisture around the body of the pipe with a washcloth. Follow the application procedure instruction for applying the epoxy compound. For most brands, you will first have to flatten it using both your palms. Once through, stick the material directly to the body of the pipe that has a leak. Make sure to place the epoxy centred above the gaping hole. To pack the epoxy on the top of the hole properly, you may use a plumber’s knife or, in the absence of one, your thumb. Leave the epoxy to dry for 20-25 minutes. After the intended time of curing, you can then turn the supply valve back on without the fear of leakage.

4. Use hose clamp.

You will not need any professional help with this method. All you will need is a rubber patch and an automotive clamp. If you do not have these materials lying around the house, you can make a quick run to the hardware store and purchase them.
Again, activate the shut-off valve. Place the rubber aligned above the crack, close the C-clamp around it and tighten the mechanism on. Remember that although the result looks quite sturdy and may last for a long time, this is a temporary solution and you need to have a professional plumber check and repair your lines.